Simultaneous localization and mapping

src: i.ytimg.com

In robotic mapping and navigation, simultaneous localization and mapping (SLAM) is the computational problem of constructing or updating a map of an unknown environment while simultaneously keeping track of an agent's location within it. While this initially appears to be a chicken-and-egg problem there are several algorithms known for solving it, at least approximately, in tractable time for certain environments. Popular approximate solution methods include the particle filter, extended Kalman filter, and GraphSLAM.

SLAM algorithms are tailored to the available resources, hence not aimed at perfection, but at operational compliance. Published approaches are employed in self-driving cars, unmanned aerial vehicles, autonomous underwater vehicles, planetary rovers, newer domestic robots and even inside the human body.

Video Simultaneous localization and mapping

Problem definition

Given a series of sensor observations ${\displaystyle o_{t}}$ over discrete time steps ${\displaystyle t}$, the SLAM problem is to compute an estimate of the agent's location ${\displaystyle x_{t}}$ and a map of the environment ${\displaystyle m_{t}}$. All quantities are usually probabilistic, so the objective is to compute:

${\displaystyle P(m_{t},x_{t}|o_{1:t})}$

Applying Bayes' rule gives a framework for sequentially updating the location posteriors, given a map and a transition function ${\displaystyle P(x_{t}|x_{t-1})}$,

${\displaystyle P(x_{t}|o_{1:t},m_{t})=\sum _{m_{t-1}}P(o_{t}|x_{t},m_{t})\sum _{x_{t-1}}P(x_{t}|x_{t-1})P(x_{t-1}|m_{t},o_{1:t-1})/Z}$

Similarly the map can be updated sequentially by

${\displaystyle P(m_{t}|x_{t},o_{1:t})=\sum _{x_{t}}\sum _{m_{t}}P(m_{t}|x_{t},m_{t-1},o_{t})P(m_{t-1},x_{t}|o_{1:t-1},m_{t-1})}$

Like many inference problems, the solutions to inferring the two variables together can be found, to a local optimum solution, by alternating updates of the two beliefs in a form of EM algorithm.

Maps Simultaneous localization and mapping

Algorithms

Statistical techniques used to approximate the above equations include Kalman filters and particle filters (aka. Monte Carlo methods). They provide an estimation of the posterior probability function for the pose of the robot and for the parameters of the map. Set-membership techniques are mainly based on interval constraint propagation. They provide a set which encloses the pose of the robot and a set approximation of the map. Bundle adjustment, and more generally Maximum a posteriori estimation (MAP), is another popular technique for SLAM using image data, which jointly estimates poses and landmark positions, increasing map fidelity, and is used in commercialized SLAM systems such as Google's ARCore which replacing their previous augmented reality project 'tango'. MAP estimators compute the most likely explanation of the robot poses and the map given the sensor data, rather than trying to estimate the entire posterior probability.

New SLAM algorithms remain an active research area, and are often driven by differing requirements and assumptions about the types of maps, sensors and models as detailed below. Many SLAM systems can be viewed as combinations of choices from each of these aspects.

Mapping

Topological maps are a method of environment representation which capture the connectivity (i.e., topology) of the environment rather than creating a geometrically accurate map. Topological SLAM approaches have been used to enforce global consistency in metric SLAM algorithms.

In contrast, grid maps use arrays (typically square or hexagonal) of discretized cells to represent a topological world, and make inferences about which cells are occupied. Typically the cells are assumed to be statistically independent in order to simplify computation. Under such assumption, ${\displaystyle P(m_{t}|x_{t},m_{t-1},o_{t})}$ are set to 1 if the new map's cells are consistent with the observation ${\displaystyle o_{t}}$ at location ${\displaystyle x_{t}}$ and 0 if inconsistent.

Modern self driving cars mostly simplify the mapping problem to almost nothing, by making extensive use of highly detailed map data collected in advance. This can include map annotations to the level of marking locations of individual white line segments and curbs on the road. Location-tagged visual data such as Google's StreetView may also be used as part of maps. Essentially such systems simplify the SLAM problem to a simpler localisation only task, perhaps allowing for moving objects such as cars and people only to be updated in the map at runtime.

Sensing

SLAM will always use several different types of sensors, and the powers and limits of various sensor types have been a major driver of new algorithms. Statistical independence is the mandatory requirement to cope with metric bias and with noise in measures. Different types of sensors give rise to different SLAM algorithms whose assumptions are which are most appropriate to the sensors. At one extreme, laser scans or visual features provide details of a great many points within an area, sometimes rendering SLAM inference unnecessary because shapes in these point clouds can be easily and unambiguously aligned at each step via image registration. At the opposite extreme, tactile sensors are extremely sparse as they contain only information about points very close to the agent, so they require strong prior models to compensate in purely tactile SLAM. Most practical SLAM tasks fall somewhere between these visual and tactile extremes.

Sensor models divide broadly into landmark-based and raw-data approaches. Landmarks are uniquely identifiable objects in the world whose location can be estimated by a sensor--such as wifi access points or radio beacons. Raw-data approaches make no assumption that landmarks can be identified, and instead model ${\displaystyle P(o_{t}|x_{t})}$ directly as a function of the location.

Optical sensors may be one-dimensional (single beam) or 2D- (sweeping) laser rangefinders, 3D High Definition LiDAR, 3D Flash LIDAR, 2D or 3D sonar sensors and one or more 2D cameras. Since 2005, there has been intense research into VSLAM (visual SLAM) using primarily visual (camera) sensors, because of the increasing ubiquity of cameras such as those in mobile devices. Visual and LIDAR sensors are informative enough to allow for landmark extraction in many cases. Other recent forms of SLAM include tactile SLAM (sensing by local touch only), radar SLAM, and wifi-SLAM (sensing by strengths of nearby wifi access points). Recent approaches apply quasi-optical wireless ranging for multi-lateration (RTLS) or multi-angulation in conjunction with SLAM as a tribute to erratic wireless measures. A kind of SLAM for human pedestrians uses a shoe mounted inertial measurement unit as the main sensor and relies on the fact that pedestrians are able to avoid walls to automatically build floor plans of buildings. by an indoor positioning system.

For some outdoor applications, the need for SLAM has been almost entirely removed due to high precision differential GPS sensors. From a SLAM perspective, these may be viewed as location sensors whose likelihoods are so sharp that they completely dominate the inference. However GPS sensors may go down entirely or in performance on occasions, especially during times of military conflict which are of particular interest to some robotics applications.

Kinematics modeling

The ${\displaystyle P(x_{t}|x_{t-1})}$ term represents the kinematics of the model, which usually include information about action commands given to a robot. As a part of the model, the kinematics of the robot is included, to improve estimates of sensing under conditions of inherent and ambient noise. The dynamic model balances the contributions from various sensors, various partial error models and finally comprises in a sharp virtual depiction as a map with the location and heading of the robot as some cloud of probability. Mapping is the final depicting of such model, the map is either such depiction or the abstract term for the model.

For 2D robots, the kinematics are usually given by a mixture of rotation and "move forward" commands, which are implemented with additional motor noise. Unfortunately the distribution formed by independent noise in angular and linear directions is non-Gaussian, but is often approximated by a Gaussian. An alternative approach is to ignore the kinematic term and read odometry data from robot wheels after each command--such data may then be treated as one of the sensors rather than as kinematics.

Multiple objects

The related problems of data association and computational complexity are among the problems yet to be fully resolved, for example the identification of multiple confusable landmarks. A significant recent advance in the feature-based SLAM literature involved the re-examination of the probabilistic foundation for Simultaneous Localisation and Mapping (SLAM) where it was posed in terms of multi-object Bayesian filtering with random finite sets that provide superior performance to leading feature-based SLAM algorithms in challenging measurement scenarios with high false alarm rates and high missed detection rates without the need for data association.

Popular techniques for handling multiple objects include Joint Probabilistic Data Association Filter (JPDAF) and probability hypothesis density filter (PHD).

Moving objects

Non-static environments, such as those containing other vehicles or pedestrians, continue to present research challenges. SLAM with DATMO is a model which tracks moving objects in a similar way to the agent itself.

Loop closure

Loop closure is the problem of recognizing a previously-visited location and updating beliefs accordingly. This can be a problem because model or algorithm errors can assign low priors to the location. Typical loop closure methods apply a second algorithm to compute some type of sensor measure similarity, and re-set the location priors when a match is detected. For example, this can be done by storing and comparing bag of words vectors of SIFT features from each previously visited location.

Exploration

"Active SLAM" studies the combined problem of SLAM with deciding where to move next in order to build the map as efficiently as possible. The need for active exploration is especially pronounced in sparse sensing regimes such as tactile SLAM. Active SLAM is generally performed by approximating the entropy of the map under hypothetical actions. "Multi agent SLAM" extends this problem to the case of multiple robots coordinating themselves to explore optimally.

Biological inspiration

In neuroscience, the hippocampus appears to be involved in SLAM-like computations, giving rise to place cells, and has formed the basis for bio-inspired SLAM systems such as RatSLAM.

Complexity

Researchers and experts in artificial intelligence have struggled to solve the SLAM problem in practical settings: that is, it required a great deal of computational power to sense a sizable area and process the resulting data to both map and localize. A 2008 review of the topic summarized: "[SLAM] is one of the fundamental challenges of robotics . . . [but it] seems that almost all the current approaches can not perform consistent maps for large areas, mainly due to the increase of the computational cost and due to the uncertainties that become prohibitive when the scenario becomes larger." Generally, complete 3D SLAM solutions are highly computationally intensive as they use complex real-time particle filters, sub-mapping strategies or hierarchical combination of metric topological representations, etc.

Robots that use embedded systems cannot fully implement SLAM because of their limitation in computing power. Nguyen V., Harati A., & Siegwart R. (2007) presented a fast, lightweight solution called OrthoSLAM, which breaks down the complexity of the environment into orthogonal planes. By mapping only the planes that are orthogonal to each other, the structure of most indoor environments can be estimated fairly accurately. OrthoSLAM algorithm reduces SLAM to a linear estimation problem since only a single line is processed at a time.

src: www.doc.ic.ac.uk

Implementations

Various SLAM algorithms are implemented in the open-source robot operating system (ROS) libraries, often used together with the Point Cloud Library for 3D maps or visual features from OpenCV.

src: i.ytimg.com

History

A seminal work in SLAM is the research of R.C. Smith and P. Cheeseman on the representation and estimation of spatial uncertainty in 1986. Other pioneering work in this field was conducted by the research group of Hugh F. Durrant-Whyte in the early 1990s. which showed that solutions to SLAM exist in the infinite data limit. This finding motivates the search for algorithms which are computationally tractable and approximate the solution.

The self-driving STANLEY and JUNIOR cars, led by Sebastian Thrun, won the DARPA Grand Challenge and came second in the DARPA Urban Challenge in the 2000s, and included SLAM systems, bringing SLAM to worldwide attention. Mass-market SLAM implementations can now be found in consumer robot vacuum cleaners. Self-driving cars by Google and others have now received licenses to drive on public roads in some US states.

src: s-media-cache-ak0.pinimg.com

See also

• List of SLAM Methods
• Computational photography

• Kalman filter
• The Mobile Robot Programming Toolkit (MRPT) project: A set of open-source, cross-platform libraries covering SLAM through particle filtering and Kalman Filtering.
• Monte Carlo localization
• Multi Autonomous Ground-robotic International Challenge: A $1.6 million international challenge requiring multiple vehicles to collaboratively map a large area
• Neato Robotics
• Particle filter
• Project Tango
• Registration of range images
• Robotic mapping
• Stanley, a DARPA Grand Challenge vehicle winner using SLAM techniques
• Stereophotogrammetry
• Structure from motion.

src: i.ytimg.com

References

src: pbs.twimg.com

External links

• Probabilistic Robotics by Sebastian Thrun, Wolfram Burgard and Dieter Fox with a clear overview of SLAM.
• SLAM For Dummies (A Tutorial Approach to Simultaneous Localization and Mapping).
• Andrew Davison research page at Imperial College London about SLAM using vision.
• openslam.org A good collection of open source code and explanations of SLAM.
• Matlab Toolbox of Kalman Filtering applied to Simultaneous Localization and Mapping Vehicle moving in 1D, 2D and 3D.
• SLAM Example using Processing.js of Feature-Based Navigation.
• FootSLAM research page at DLR including the related Wifi SLAM and PlaceSLAM approaches.
• SLAM lecture Online SLAM lecture based on Python.

Source of article : Wikipedia